Please help me out z3 question

[01silvz3texas]

Hello guys, I hope all is well in europe with you all
I need some help please, Im in the process of adding the headlight washers to my car. The car is pre wired for them and I bought the washer pump and that is where my problem is. the cars pre wiring has a 2 flat pin connector and the washer pump has a 2 pin round connector.
Here is what I need please, Can you unclip the wire off the headlight washer pump and write down the numbers that are on the connector there should be 6 to 8 digits on the connector, they are small but they are there, and if possible can you take some pictures of the connector and the pump where it connects so I can see what type of connector they are using. this will take all of 5 minutes to do and there is no risk of anything getting hurt on your car
Ill include 2 pictures to show you my problem
please help

[BjörnZ3]

Just press hard enough...

Sorry, mate, can't help due to the fact that my car ist not eqiupped with headlight washers.

[01silvz3texas]

sorry