313 felgen for BMW Z4 e89

Hi all

I found some BMW 313 felgen on ebay,

https://www.ebay-kleinanzeigen.de/s...komplettraeder-reifen-neu-/440024657-223-9398

Will they fit on my BMW z4 E89 without any modifications?

Thank you very much!

Not neccessarily. There are versions of the 313 for the BMW 3 Series with different offsets, which would require 10mm spacers on the front axle.
BMW Z4 Styling 313 19" offsets: 29 front, 40 rear
BMW 3er Styling 313 19" offsets: 37 front, 39 rear

Two of the wheels on EBay are pretty damaged/scratched on the edges. This can be quite hard or even impossible to repair, because the edges are sheen finished. I would estimate costs of 150-200€ per wheel.
One of the scratched wheels also has some kind of oxidation below the paint in the center. Add another 50-150€ of repait costs.
 
Hi @zz304

So they will not fit on my Bmw z4 ? :)

As I said, if they are the version for the 3 Series BMW you will need 10mm spacers on each wheel at the front axle. And if you live in Germany you will need a "Tragfähikeits-/Festigkeitsgutachten" from BMW and the setup requires an "Einzelabnahme" from the TÜV. On top of that, if you use H&R spacers you will need an "Unbedenklichkeitsbescheinigung" from H&R to put spacers on the front axle only, because their "Teilegutachten" is only valid for spacers on the rear axle or spacers on the rear and front axle, where the rear spacers must be larger/broader than the front ones.

If you are lucky and those are the Z4 version, just put them on your car and you are good to go, no TÜV-Abnahme neccessary.

Hi @pixelrichter

Hope you are ok! What is the different between performance and M-felgen?

They are virtually identical. The performance has performance written on it and no M logo, the M Flege has no wirting, but an M logo on it.
 
Zuletzt bearbeitet:
Zurück
Oben Unten