Image des Z4?

Hi,
wie gesagt das war nur mal schnell blind in Handy getippt, so sieht bei mir Normal aus:
i visited tuesday till friday xxxxx in Newsealand and had very good discussions with xxxxxx, the general manager.He likes the Raute peeling line a lot, he is definetely a Raute fan. He has a lot of experience and is someone who´s comments i do take serious.
We went through the project and he raised big concerns about the panel width of 6 foot.
Because of cupping and warping, which is an issue in radiator pine . Therefore they have heavy boards on each stack of pressed LVL panels in the conditioning area. I have not seen that in any other place so far, but he mentionend beech may be also a difficult species als far as warping and cupping. What´s your opion on that point?

Also ich komme schon klar.
 
Uli_ESA schrieb:
Hi,
wie gesagt das war nur mal schnell blind in Handy getippt, so sieht bei mir Normal aus:
i visited tuesday till friday xxxxx in Newsealand and had very good discussions with xxxxxx, the general manager.He likes the Raute peeling line a lot, he is definetely a Raute fan. He has a lot of experience and is someone who´s comments i do take serious.
We went through the project and he raised big concerns about the panel width of 6 foot.
Because of cupping and warping, which is an issue in radiator pine . Therefore they have heavy boards on each stack of pressed LVL panels in the conditioning area. I have not seen that in any other place so far, but he mentionend beech may be also a difficult species als far as warping and cupping. What´s your opion on that point?

Also ich komme schon klar.
Zum Vergrößern anklicken....
Nix für ungut (nothing for ungood)...aber auch hier findet Kollege Brummm noch genug um sich auszutoben fürchte ich...:s :X
 
Das war früher in der SZ eine Serie - wunderbar, habe mich immer darauf gefreut. Wenn ich mich nicht irre, gibt es diese Briefe auch als Buchform.

Tim
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben Unten